OVERHEAD RAILS


    OVERHEAD RAILS are usually single rails (monorails) that hang from the ceiling moving the product attached or hanging from it by pulling a track, chain or trolley through a system of tracks and turns. They are an efficient and economic method to utilize areas above the floor. They are ideal for transporting parts through ovens, paint booths, or similar operations.

    If you would like to request information on all Overhead Rails and Parts then click this email link:

    All Overhead Rails and Parts Information Request

    If you want specific information about one type of Overhead Rail then each item has a link below its description that will start an email for that specific item.


    Overhead Monorail Components

   
Track, Chain and Trolley

   
Roller Turn

   
Traction Wheel Turn

   
Take-Up
    ROLLER TURNS AND TRACTION WHEEL TURNS
  • Both types maintain chain and trolley alignment during horizontal changes in direction.
  • Roller Turns are available with a pitch radius up to 72 inches.
  • Traction Wheel Turns are available with a pitch diameter up to 72 inches.
  • Traction Wheel Turns are available in a spoke type or plate type.
    TAKE-UPS
  • Take-Ups remove slack in the chain.
  • Spring type, screw type, air cylinder type, and counter weight type take-ups are available.
  • 8 in., 16 in., or 24 in. travels and standard.
    DRIVES
  • Caterpillar Drives and Sprocket Drives are available.
  • Chain pulls available up to 3950 lbs.
  • Caterpillar Drives are available with fixed or floating frame.
    TRACK & ACCESSORIES
  • Anti-backup and anti-runaway safety devices.
  • 3 in., 4 in., or 6 in. I-beam track.
  • 228, 348, 458 or 678 chain.
  • Vertical curve track.
  • Expansion joints.
    Overhead Monorail Information Request

    Back to top


    TRACTION WHEEL HUB
    Traction Wheel Hubs are used with traction wheel turns. They are designed to be interchangeable with most other manufacturer's hubs. A version is available to operate in temperatures up to 750° F.

   
  • Available with tapered roller bearings or with metalized graphite bushing.
  • Safety plate prevents shaft and hub from falling through the base should the keeper plate be dislodged.
  • 8000 lbs. capacity.
    Traction Wheel Hub Information Request

    Back to top


© Copyright 2000-2006 by Diversified Engineering Concepts
jordan 6 sport blue jordan 3 sport blue louis vuitton outlet sport blue 6s sport blue 6s cheap jordans sport blue 3s retro jordans louis vuitton outlet Sport blue 14s louis vuitton outlet michael kors uk jordan 3 wolf grey louis vuitton outlet kate spade outlet louis vuitton outlet wolf grey 3s louis vuitton uk sport blue 3s louis vuitton outlet